Product Information

 

         Quality & Comfort

 

Fraser-Johnston® Heating & Air Conditioning home comfort systems are designed and built to provide maximum quality, comfort, and efficiency to your home. Whether you're looking for a furnace, an air conditioner or a complete heating and cooling solution , your Fraser-Johnston® Dealer can evaluate factors such as your home's size, age, number of rooms, regional climate, and utility costs to select the best system for your home.

   

 

Get Certified

 
 

Nate

NATE
Fraser-Johnston® encourages professionalism through North American Technician Excellence, Inc.(NATE). NATE is the leading certification program for technicians in the heating, ventilation, air-conditioning and refrigeration (HVAC/R) industry, and is the only test supported by the entire industry.

Energy Star

ENERGY STAR
Earning the ENERGY STAR® means products meet strict energy efficiency guidelines set by the U.S. Environmental Protection Agency and the Department of Energy. When compared to standard models, ENERGY STAR® products are between 15 and 25% more efficient. This model meets ENERGY STAR® requirements for energy efficiency.



ISO 9001 Certified Company
   

 

Selected Product Details and Documentation

 
 

Fraser-Johnston Heating and Air Conditioning

 

Product Details
MODELTM9E
PRODUCT95.0% AFUE Single Stage ECM Multi-Position Gas Furnace
 
 
 
CAPACITY40 - 120 MBH Input
EFFICIENCY95.0% AFUE
WARRANTIES 
CompressorN/A
Heat ExchangerLifetime
Parts10-Year Limited*
 
DESCRIPTION 
 

These compact units employ induced combustion, reliable hot surface ignition and high heat transferaluminized tubular heat exchangers. The units are factory shipped for installation in upflow or horizontal applications and may be converted for downflow applications.

These furnaces are designed for residential installation in a basement, closet, alcove, attic, recreation room or garage and are also ideal for commercial applications. All units are factory assembled, wired and tested to assure safe dependable and economical installation and operation.

These units are Category IV listed and may be vented either through side wall or roof applications using approved plastic combustion air and venr piping.

BENEFITS 
 
  • Easily applied in upflow, horizontal left or right, or downflow installation with minimal conversion necessary.
  • Compact, easy to install, ideal height 33" tall cabinet.
  • Blower-off delay for cooling SEER improvement.
  • Easy access to controls to connect power/control wiring.
  • Built-in, high level self diagnostics with fault code displays standard on integrated control module for reliable operation.
  • Low unit amp requirement for easy replacement application.
  • All models are convertable to use propane (LP) gas.
  • Electronic Hot Surface Ignition saves fuel cost with increased dependability and reliability.
  • 100% shut off main gas valve for extra safety.
  • 5 speed, direct drive Standard ECM style high efficiency DC motor.
  • 24V, 40 VA control transformer and blower relay supplied for add-on cooling.
  • Hi-tech tubular aluminized steel primary heat exchanger.
  • Secondary heat exchanger made of corrosion resistant stainless steel materials.
  • Timed on, adjustable off blower capability for maximum comfort.
  • Blower door safety switch.
  • Solid removable bottom panel allows easy conversion.
  • Airflow leakage less than 1% of nominal airflow at ductblaster conditions.
  • No knockouts to deal with, making installation easier.
  • Movable duct connector flanges for application flexibility.
  • Quiet inducer operation.
  • Inducer rotates for easy conversion of venting options.
  • Fully supported blower assembly for easy access and removal of blower.
  • External air filters used for maximum flexibility in meeting customers IAQ needs.
  • Protection included from air intake, exhaust vent, or condensate blockage.
  • Patent pending self priming internal condensate trap design for easy installation.
  • Venting applications - may be installed as a either 2-pipe (sealed combustion) or single-pipe vent (using indoor combustion air.
  • No special vent termination required.
  • 1/4 turn knobs provided for easy door removal.
  • High-efficiency blower motor for lower electrical power usage and improved A/C SEER ratings.
  • Insulated blower compartment for terminal and acoustic performance.

*Must be installed on or after May 1st, 2009, and registered online within 90 days of installation. Otherwise, the warranty reverts to the standard warranty as published in the product warranty certificate.

 

PRODUCT DOCUMENTATION
DESCRIPTIONFILE NAMEFILE KB
Consumer Brochure - Fraser-Johnston Reliant™ Residential Gas Furnaces TP9C, TM9M, TM9Y, TPLC, TM8Y, TM8V, TM9V, TM9T, TM9E, TG9S, TM8T, TM8X & TG8SPUBL-8710-A-0817.PDF899
Installation Accessory - S1-32924441000 STAINLESS STEEL NATURAL GAS BURNER KIT035-21367-001-B-0412.PDF12
Installation Accessory - S1-32926889000 STAINLESS STEEL PROPANE LP BURNER KIT035-24610-001-A-0416.PDF65
Accessory Kit Installation Manual - All 33" Furnace Model Burner Box Wrapper Kits S1-37339477001(2 Cell), S1-37339477002 (3 Cell), S1-37339477003 (4 Cell), S1-37339477004 (5 Cell), S1-37339477005 (6 Cell), S1-37339477006 (7 Cell)5352742-UAI-A-0417.PDF48
Installation Accessory - 1BR0514/614, 1BR0517/617, 1BR0521/621 & 1BR0524/624 External Bottom Mount Filter Frame Accessory506177-UAI-B-0817.PDF37
Guide d' Installations - S1-1CT0302-636/S1-1CT0303-636 Terminaison D'Event Concentrique435695-UAIF-A-1108.pdf71
NEUTRALIZER KIT (S1-1NK0301)035-24119-001-A-0814.PDF16
Cladding Accessory - S1-37327901001 (York), S1-37327901003 (Coleman) & S1-37327901002 (Luxaire)518112-UAI-B-0914.PDF42
Installation Accessory - Burner Alignment Bracket for use with All 33" Gas Furnaces826018-uai-a-1111.pdf106
Installation Accessory - S1-32642583000 and S1-3264594000 Inducer Replacement Kits035-24175-001-A-1014.PDF98
Installation Accessory - S1-37327813001 Furnace Label Kit341248-UAI-A-0707.pdf11
Installation Accessory - 1SR0200 Filter Frame1135041-UAI-B-0616.PDF45
Installation Accessory - 1SR0402 Filter Frame430731-UAI-A-0908.pdf38
Installation Accessory - 1SR0200, 1BR0114, 1BR0214, 1BR0117, 1BR0217, 1BR0121, 1BR0221, 1BR0124, & 1BR0224 Filter Rack Kits171002-UAI-B-0514.PDF49
Installation Accessory - 1CB0514, 17, 21, & 24 Floor Base Accessory397059-UAI-A-0408.pdf54
Installation Accessory - 1CT0302, 1CT0303 Concentric Vent Termination66641-UIM-F-0905_035-14287-000.pdf73
Installation Accessory - 1NP0347 Propane Conversion - Induced Combustion Furnaces1065603-UAI-C-1015.PDF219
Installation Accessory - 1HT0901 Side Wall Vent Kit (1-1/2”, 2” or 3” vent systems)276015_035-20614-001-A-0804.PDF47
Installation Accessory - 1HT0902 Side Wall Vent Kit (1-1/2” or 2” vent systems)276016-UAI-A-1006.pdf125
Installation Manual - TM9E Single Stage ECM Residential Gas Furnace (95% AFUE Multi-position)1083163-UIM-H-0817.PDF2137
Quick Reference Guide - 95.0% AFUE Single-Stage Multi-Position 33" Gas Furnaces1104909-URG-B-0616.PDF222
REPAIR PARTS - TM9E SERIES 95% SINGLE STAGE MULTI-POS 33" NAT GAS FURNACES W/HI-EFF MTRS. (STYLE A)035-23697-001-N-1117.PDF699
Submittal Data Sheet - TM9E 95.0% AFUE Single-Stage Multi-Position Gas Furnaces 1104782-USD-C-0615.PDF99
Technical Guide - TM9E 95.0% Single-Stage Multi-Position Gas Furnaces1104781-BTG-E-1016.PDF177
User Manual - All Residential Multi-Position 33" Gas Furnaces1010352-UUM-I-0917.PDF2133
Fraser-Johnston 2015-16 Tax Credit Certificate68880
Price Pages - GUARDIAN, FJ SERIES, 95% to 98% AFUE 33" GAS FIRED FURNACES_036-13944-004-F-1017-FJ.XLSX505